Technical characteristics of the labyrinth drip irrigation tape extrusion line
1. The production line is equipped with high-efficiency extruder, quick-change mesh device and screw plastic blow molding device;
2. Specially designed vacuum forming matrix to ensure the accuracy and density of the composite;
3. Unique measuring device and scale to ensure the accuracy of products;
4. The extruder and traction adopt AC frequency conversion technology;
5. The temperature is controlled by temperature control meter to realize PID control;
6.Production is controlled by PLC, all technical parameters can be set on the touch screen;
Main parameters of drip irrigation strip:
Productivity: 70 m/min
Drip irrigation strip diameter: 16-18 mm
Drip irrigation strip thickness: 0.16/0.18/0.20 mm
Drip unit distance: 100/200/250/300/400/500/750 mm
Main extruder:
Japanese OMRON Temperature Control Meter,
inverter Siemens Contactor ABB
Forming and cooling unit
Forming wheel: Diameter φ381mm, material 20Cr13
Opticbundles 9V Laser Caliper with DC Voltage Stabilizer
Winding block
Two-position torque motor
Screw material 38CrMoALA
Screw diameter (mm) 75
Screw speed (rpm) 200 rpm
Voltage 380 V 50 Hz
Power (kW) 37
Material PP PE LDPE HDPE
Capacity 70 m/min
Engine power 37 kW